| Content | ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip designed with the TSMC ultra-low-power 40 nm technology. It is designed to achieve the best power and RF performance, versatility, and reliability in a wide variety of applications and power scenarios.
Ideal for low-power applications, the ESP32 SoC features fine-grained clock gating, multiple power modes, and dynamic power scaling. A low duty cycle is used to minimize the amount of energy that the ESP32 SoC expends. The output of the power amplifier is also adjustable, thus contributing to an optimal trade-off between communication range, data rate, and power consumption. The ESP32 SoC is highly-integrated with in-built antenna switches, power amplifiers, low-noise receive amplifiers, and power management modules. ESP32 adds priceless functionality and versatility to IoT applications with minimal Printed Circuit Board (PCB) requirements.
Pin Diagram
Features:
Package Includes:
1 x ESP32-D2WD IC QFN48
| | |
The PIC16F1503-I/P is an enhanced mid-range PIC16 family 8-bit powerful (200 nanosecond instruction execution) yet easy-to-program CMOS flash-based Microcontroller packs powerful PIC®(RISC) architecture. This product offers all of the advantages of the well-recognized mid-range x14 architecture with standardized features including 3.5kB of addressable program memory size, 128bytes of data memory size, 12 general-purpose I/O pins, two comparators, 8-channel 10-bit analog-to-digital (A/D) converter, and one 5-bit digital-to-analog (D/A) converter. This device operates at a maximum frequency of 20MHz with a wide operating voltage of 1.8 to 5.5V.
- 49 (14-bit wide) easy instructions to learn
- 16 level hardware stack
- 2 (16-bit) file select registers
- Hardware interrupt handling with the content save
- 16MHz internal oscillator
- Programmable brown-out reset (BOR)
- Power-on reset (POR)
- Internal voltage reference (Bandgap)
- Two 8-bit digital timers
- One 16-bit digital timer
- Four stand-alone PWM
- 2x Configurable logic cell modules (CLC)
- 1x Complementary waveform generator (CWG)/Complementary output generator (COG)
- Numerically controlled oscillator (NCO)
- In-Circuit Serial Programming (ICSP)
Applications
Industrial, Automotive, Consumer Electronics, Motor Drive & Control, Lighting, Medical, Security
Note:
- Product Images are shown for illustrative purposes only and may differ from the actual product.
- For Technical Specifications about the IC go through the Datasheet.
Package Includes:
1 x PIC 16F1503 20 MHz, 3.5 KB, 128 Byte 8-Bit MCU PIC16 Family Microcontroller IC
| TM1640 16-Digit Seven Segment Display Driver Circuit - 2 Wire Serial Interface - SOP28 - Titan Micro TM1640 is a LED (Light Emitting Diode Display) drive control circuit integrating MCU digital interface, digital latch, LED high voltage drive circuit, etc. The product has excellent performance and reliable quality, and is mainly applied in display drive for electronic scales and other small home appliances. In addition, it adopts the SOP28 packaging mode. ● Power CMOS technique
● Display mode (8 sections × 16 bits) supports common cathode digital tube output
● Brightness adjusting circuit (duty cycle adjustable among 8 levels)
● Dual-line serial interface (CLK, DIN)
● Mode of oscillation: built-in RC oscillation (450KHz+5%)
● Built-in power-on reset circuit
● Built-in auto blanking circuit
● Mode of packaging: SOP28 | ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip designed with the TSMC ultra-low-power 40 nm technology. It is designed to achieve the best power and RF performance, versatility, and reliability in a wide variety of applications and power scenarios.
Ideal for low-power applications, the ESP32 SoC features fine-grained clock gating, multiple power modes, and dynamic power scaling. A low duty cycle is used to minimize the amount of energy that the ESP32 SoC expends. The output of the power amplifier is also adjustable, thus contributing to an optimal trade-off between communication range, data rate, and power consumption. The ESP32 SoC is highly-integrated with in-built antenna switches, power amplifiers, low-noise receive amplifiers, and power management modules. ESP32 adds priceless functionality and versatility to IoT applications with minimal Printed Circuit Board (PCB) requirements.
Pin Diagram
Features:
Package Includes:
1 x ESP32-D0WDQ6 IC QFN48 |
